Zincol Ossidi,
Cairo Montenotte, Savona, Italy
The warehouses, built using reinforced concrete prefabrication technology and coloured grit infill panels, feature 24 to 27-metre span roofing and rafters. Photovoltaic panels have been placed on the largest of the four buildings to produce electricity; interior brightness is guaranteed by the presence of continuous or shed industrial skylights. Moretti also built the plinths for […]
Vidrala,
Corsico, Milan, Italy
The renovation work covered a total area of approximately 4,000 m2. Moretti Modular Contractor was responsible for the construction of the prefabricated structure, the sheet metal roofing and the infills, which were built using a metal frame and straight corrugated sheets. The structure is supported, in the highest part, by pillars 30 m high under […]
Omal,
Passirano, Brescia, Italy
Particular attention was also paid to energy-saving and earthquake-resistant aspects. In particular, panels and roofs with a high degree of thermal insulation were used. The production building has a structural mesh of 22×10 m, with gull-wing beams and, on the roof, sheds and a photovoltaic system. The building, also built in its load-bearing structure with […]
Lumson,
Capergnanica, Cremona, Italy
Moretti Modular Contractor has been able to interpret the original architectural design with great rigour and respect, creating an extremely contemporary building clad entirely in Alucobond. The two-storey structure, which stands out for its lustrous, high-tech character, is softened by the rounded edges with which the main facade of the building is closed on both […]
Imecon Engineering,
Fiesco, Cremona, Italy
The first extension of Imecon Engineering’s headquarters coincided with EXPO2015. Thus, a prefabricated structure was built using deltaplane roofing tiles, insulated with a 16 mm rock wool panel and an additional 12 cm thick high-density sandwich roofing panel. A powerful photovoltaic system was installed above the roof of the building. Subsequently, the introduction of new […]
Franchini Acciai,
Mairano, Brescia, Italy
Therefore, the warehouses are designed as large single- and double-bay hangars, with spans of 25 m and heights up to 24 m. The intervention, which is characterized by compliance with the latest anti-seismic regulations and high acoustic insulation, was completed with the construction of plant rooms to serve the hangars. A feature of the intervention […]
Bulgari,
Alessandria, Italy
The building is spread over three levels, with a 600 m2 courtyard in the centre that guarantees a high level of natural light. The building is entirely enclosed by a metal skin, with a spacing of about 6 m. Moretti Modular Contractor collaborated in the construction of the building housing the Bulgari factory, supplying and […]
Ansett Aviation Italia,
Somma Lombardo, Varese, Italy
The “Training Pilot Center,” spanning approximately 3,000 m2 and housing four flight simulators along with their offices and classrooms, was built in an expansion area of the Malpensa Airport situated between the two terminals. The building, realised on a turnkey basis by Moretti Modular Contractor, integrates reinforced concrete and glulam into the prefabricated structures. The […]
Ambrosi,
Castenedolo, Brescia, Italy
The exterior of the factory was renovated using 94 modular panels measuring 2.45×12.30 m. This amounts to approximately 2,800 m2 of original and stylish improvement to the image of this company — one of Italy’s leading dairy producers. The white cladding is achieved through the application of a special photocatalytic paint, which improves the sustainability […]
Diamant Holding,
Bonferraro Di Sorgà, Verona, Italy
Moretti Modular Contractor was responsible for the design and construction of the prefabricated structures of the building, which covers approximately 8,000 m2 (80 x 100 m) and is divided into four spans. The relevant work was completed in just 3 months. The building is structured into four spans: the first and last have a span […]